1. How to input paper pieces into the computer
1.1 Connect digitizer and nesting software;
1.2 Place paper pieces;
1.3 Start typing;
2. How to manage piece data
2.1 Quantity and name;
2.2 Adjust the level of the piece;
2.3 Change the direction of the piece;
2.4 Copy pieces;
2.5 Change the size of the piece;
2.6 Change the unit name of the software;
3. How to automatic nesting
3.1 Enter the width of the fabric and the distance between the pieces;
3.2 Save as PLT vector graphics;
4. Test before cutting
4.1 Test knife depth;
4.2 Adjust the cutting compensation of the tool;
5. How to automatic cutting
5.1 Place the fabric roll on the feeding system;
5.2 Spreading;
5.3 Start the feeding system;
5.4 Fine-tuning the fabric;
5.4 Start the machine and reset;
5.5 Rab;
5.6 Set zero point;
5.7 Fine-tuning the conveying of fabrics;
5.8 Send processing graphics to the machine;
5.9 Check whether the cutting pattern exceeds the fabric;
5.10 Start cutting;
5.12 Pause-click “Repeat”
